DESCRIPTION
K2 DIPER is a strong two-component alkaline detergent with high concentration and foaming properties. It removes even the toughest dirt on car bodies and tarpaulins used on platforms and trucks etc.
It is also perfect for cleaning tanks, floors in garages and service stations, mechanical workshops and factory sheds. In concentrated form, the product has two layers, but it mixes perfectly when diluted for use.
Shake well before pouring any part of the product into use.
Dilute the product with water from a minimum of 10 to a maximum of 100 parts according to the amount of dirt and the size of the surface area to be cleaned.
When used with a spray mist:
dilute from 1:30 to 1: 100. Spray the solution onto a dry surface and allow it to run for a short period before rinsing off with a high-pressure spray.
When used with high pressure water spray:
dilute the product in a ratio of 1:20 to 1:30. Allow foam to begin to drain and wash the vehicle, surfaces, etc., then rinsing with plenty of clean water.
When it is used to clean floors:
dilute the product from 1:20 to 1:60 parts. Apply over the surface by hand or using an automatic floor washer. Then rinse.
NOTE: When washing vehicle bodies, it is best to use the product in the shade and on cold surfaces. Quickly proceed to rinsing to prevent it from drying out on the car work. Especially solutions of the product with a high concentration (about 10%) should not be in contact with aluminum or light metal alloys in order to prevent staining and dulling of these surfaces. Follow the dilution instructions carefully and do not allow excessive contact time with the surfaces to be cleaned https://youtu.be/dbSCmvgnB8M