DC 12V Air Compressor, 150 PSI, with Analog Pressure Gauge, 4 Adapters

Categories: Compressors & Pumps \ Air compressors CARMOTION

MARKING

Barcode 5903140633365

Symbol 63336

LOGISTICS

Measure
unit:

pcs.

Box

Product

h	A	B	Weight
205	150	80	0,68

Collective packaging

Collective packaging
40 pcs.

DESCRIPTION

The compressor is powered by a 12V DC cigarette lighter socket. It is equipped with an analog pressure gauge and an LED flashlight. The back of the case has a pouch for adapters. The ergonomic shape facilitates storage in the trunk. Use: 1. Start the engine. 2. Plug the compressor power cord into the car's cigarette lighter socket. 3. Connect the compressor hose to the tire valve. 4. Turn on the compressor. 5. Press the pump switch to start inflating. 6. As the air inflates the tire, monitor the compressor gauge. 7. Once the desired pressure is reached, turn off the pump switch, disconnect the tire valve hose, and unplug the compressor power cord from the cigarette lighter socket. Important! 1. It is not suitable for large vehicles such as trucks. 2. When using the device, turn on the car engine. 3. Use only DC power supply (DC12V, 10A). 4. Allow the device to cool for 10 minutes. 5. If the pressure suddenly increases to 490 kPa, adjust it and try again. 6. The operation of the device must always be monitored. 8. Make sure the car plug is clean and working properly. 9. Store the device in a dry place. 10. Keep it out of reach of children. Accessories: 4 adapters. Spare fuse. Technical data: Working voltage: DC12V. Air flow: 35 L/min. Power: 120W. Current flow: ≤10A. Pumping hose length: 50 cm. Power supply type: car cigarette lighter socket. Power cord length: 300 cm. Operating temperature: -15℃~50℃.

YOU MIGHT BE INTERESTED IN

Bead mat trimmed with velor, beige

Metal fuel jerrycan, 20L

Additional panoramic exterior rearview mirror, black, 60x150 mm

Additional rearview mirror, overlay for towing

Set of wheel/tires covers, 13 "- 15", 4 pcs