DESCRIPTION
Militec-1 is a 100% synthetic oil additive based on the most advanced nanoparticle technology. The active ingredients of the product act directly on the metal parts creating a bond at the molecular level and penetrate into the intercrystalline space of the surface layers of the rubbing elements. As a result of the above reaction, a very thin and extremely durable protective layer is created on the cooperating elements. Militec-1 does not contain any potentially harmful solid elements, it does not change the elastic properties of the metal. It contributes to a significant extension of the durability of mechanisms. Militec-1 is miscible with all engine, transmission and hydraulic oils, regardless of their viscosity and quality class. Once added to the engine, Militec-1 stays inside for longer, thus protecting the engine despite regular oil changes in accordance with the car's manual. Can be used in engines with a wet clutch.
Benefits of using Militec-1:
- Reduces friction and increases the protective layer of cooperating elements, leading to extended engine life.
- Modifies the properties of friction surfaces, creating a durable layer protecting the engine during start-up, minimizing the effects of the critical phase of cold engine start-up.
- Reduces heat generation between metal parts.
- Full and continuous maximum protection of the mating parts.
- Protects against acid substances, carbon deposits, etc.
HOW TO USE:
Militec-1 should be used in the following proportions:
Gasoline and diesel engines: repeat 50 ml per 1 liter of oil every 20,000 km
Manual gearboxes: repeat 60 ml per 1 liter of oil every 50,000 km
Automatic gearboxes: repeat 50 ml per liter of oil every 50,000 km
Differentials: repeat 60 ml for 1 liter of oil every 50,000 km
Steering gears: repeat 50 ml per 1 liter of oil every 50,000 km
Car air conditioning systems: 5-10 ml with each lubricant change
Two-stroke engines: 40 ml per liter of oil which will be miscible with gasoline
Wheel bearings: apply a thin coat before lubrication
Compressors: 30 ml for 1 liter of base grease, repeat at each change or after 1000 hours of operation
Cooling device - air conditioners: 8 ml per 1 liter of refrigerant
Hydraulic machines (forklifts, jacks, etc.): 250 ml to 20 liters of hydraulic fluid after every 1000 operating hours
Firearms: Disassemble and clean the barrel and the entire structure with a degreasing solvent (after the first use of MILITEC-1, you will not need to degrease again). Apply Preparation to the inside of the barrel and all other metal parts. After a few shots, wipe the gun dry. MILITEC-1 reduces friction and wear of the structure, prevents the deposition of soot, lead and other impurities, increases the forward speed of the bullet from the barrel and improves the accuracy of the shot. The lubrication process should be repeated after about 1000 shots.
